Products List

> Vacuum Generator
> Solenoid Valves
  Automotive valves
  Dust Collector Valves
  Drain Valves
  Steam Valve
  Micro valve
  2/2 valve
  Pneumatic valve
  Special solenoid valve
  Directional Solenoid Valves
> Angle Seat Valve
  Angle Seat Valve
  Filling Valve
> Pneumatic Actuator
> Valve accessories
  Solenoid Coil
  Armature Set
  Limit Switch Box
> Approach Switch
> Pressure Switch
> E/P Regulator
> Pneumatic Ball Valve
> Pneumatic Butterfly Valve

Website Link

 Home >> Products >> Pneumatic Valve Accessories >> E/P Positioner REP-1000R(Rotary Type)
E/P Positioner REP-1000R(Rotary Type)

XINGYU ELECTRON(NINGBO) CO.,LTD. is China e, p positioner manufacturer and wholesaler. Our products are produced according to the ISO9001:2000 standards. There are more than 10 well educated and experienced technicians in our company to deal with OEM electro-pneumatic positioner services for our customers. Equipped with advanced facilities and high technology, now we are supplier of some famous enterprises such as the Parker Hannifin in the USA.
e, p positioner
electro-pneumatic positioner
Technical Parameter
Item. Type  Single Action  Double Action 
Input Signal  4-20mA DC
Impedance  250±15 Ohm
Supply Pressure  1.4-7kgf/cm2(20-100psi)
Stroke 0~90°C 
Air Connection  PT(NPT)1/4"
Gauge Connection PT(NPT)1/8" 
Conduit PF1/2"(G1/2") 
Explosion Proof ExdmllB T5 
ExdmllC T5
ExiallB T6 
Protection IP66
Ambient Temp Operating: -20°C~70°C
Explosion: -20°C~60°C
Linearity  ±1%F.S. ±2%F.S.
Hysteresis  ±1%F.S.
Sensitivity  ±0.2%F.S. ±0.5%F.S.
Repeatability  ±0.5%F.S.
Air Consumption  3LPM(Sup=1.4kgf/cm2, 20psi)
Flow Capacity  80LPM(Sup=1.4kgf/cm2, 20psi)
Material Aluminum Diecasting 
Weight  2.8kg(6.2lb)
The Elector-Pneumatic Postioner REP-1000R is used fou operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC4 to 20mA or split ranges.
• There is no resonance at 5~200Hz.
• The change of RA/DA Acting is convenient,it is able to apply to single or double acting actuator.
• It is possible to prevent the hunting with orfice to the small size actuator.
• It is economical due to less air consumption.
• It is able to control the 1/2 split range with simple operation without relacement of parts.